How Much Do Whole House Water Filtration Systems Cost?

Here is a quick breakdown of how much whole house water filtration systems typically cost (click on the links to learn more about each type of system):

  1. Reverse Osmosis Whole House Water Filtration Systems: $300-$5,000+

  2. Water Softeners: $600 - $3,000+

  3. Fridge Water Filters: $1,600 - $2,500+ (for a refrigerator with a water filter) and $30 - $100 (for replacement filters)

  4. Faucet Mounted Filters: $30 - $100

Looking for expert advice about whole house water filtration systems? Contact the experts at WaterSmart.

 

Whole house water filtration systems: Learn about the different kinds

1.Reverse Osmosis Whole House Water Filtration Systems: $300-$5,000+

Pros:

If you get your drinking water from a private supply such as a well, it may not be safe from microbiological, chemical, or other types of contamination. A reverse osmosis system can remove these harmful contaminants for you.

Here are some other great advantages to installing a reverse osmosis system:

  • Reverse osmosis can remove dissolved solids, salts, minerals that cause hardness, organic chemicals and other impurities.

  • R/O systems can improve the taste of water for people who do not like the taste of dissolved mineral solids.

  • Treated water from a reverse osmosis system will not produce scale in kettles and coffee makers.

  • Reverse osmosis units may also remove contaminants such as chromium, mercury and nitrates.

  • Reverse Osmosis units produce no noise other than the sound of water discharging into the drain (usually a sink or a floor drain).

  • Reverse osmosis systems do not need to use salt or potassium chloride to produce soft water, so there are no added ions. This is a good solution for people concerned about additional sodium in their diet.

Cons:

  • Reverse osmosis units are usually more expensive than ion-exchange water softeners but much cheaper than distillers.

  • The membranes used in the filtering process need to be replaced regularly.

  • Reverse osmosis uses more water than other softening systems to operate

 

How Reverse Osmosis Works

Watch the video to see how reverse osmosis works

 

1. Your tap water is pre-filtered

During the initial filtration stage, your tap water or well water (pressurized by a booster pump) passes through a particle filter (a pre-filter) that removes silt, sediment, sand, and clay particles that might clog the membrane of your reverse osmosis unit.

2. Water passes through a carbon filter

Next, the water is forced through an activated carbon filter that traps minerals and contaminants such as chromium, mercury, copper, chloramine and pesticides. It also removes chlorine, which is important, as chlorine will shorten the life of the membrane.

3. The filtered water is transferred into the reverse osmosis module

Water is then transferred under pressure into the reverse osmosis module. Only clean water is able to pass through the small pores in the membrane. Impurities are blocked by the membrane and are then flushed down the drain.

4. Your water passes through a second carbon filter

If your reverse osmosis is equipped with a second carbon filter then your treated water is sent to a storage tank where it passes through a second activated carbon filter to further improve the water's taste and smell.

The Duro Reverse Osmosis System, available at WaterSmart, features a two step filtration process known as pre and post-carbon block filtration. The carbon filters act as a complementary measure to block dangerous chemicals like pesticides, herbicides and chlorine, which are small enough to pass through the reverse osmosis filter.

 
 

Duro reverse osmosis whole house water filtration systems from WaterSmart give you 2 carbon filtering stages

2. Water Softeners: $600 - $3,000+

Pros:

A water softener can help you solve the following hard water problems:

  • Dry-feeling skin and hair

  • Stains in your sink, toilet, shower and bathtub

  • Plumbing pipe damage due to mineral build-up inside your pipes

  • Needing to use more soap or detergent to work up a lather when you are bathing or cleaning

  • Difficulties getting dishes or laundry clean

  • Damage to your clothing, causing them to wear out prematurely

  • Scale buildup in your washing machine, dishwasher, water heater and other appliances that use hot water

Cons:

If for health reasons you are on a sodium-reduced diet, you may be hesitant to use a water softener.

The amount of sodium added in the water softening process is minimal compared to a healthy individual’s diet. Most health concerns are related to excessive sodium chloride, not sodium bicarbonate which is a compound that results from using a salt-based softener.

 

Hard water can leave a mineral build-up on your small appliances

 

How a Water Softener Works

Here is how a water softener works.

1. Hard water is pumped into your water softener's resin tank

Hard water is pumped from your water line into your water softener's resin tanks which is full of resin beads. These beads have a negative charge.

2. Calcium and magnesium are removed from your water

Hard water contains calcium and magnesium minerals. These minerals are what makes your water hard. Calcium and magnesium have a positive charge.

Once they enter your resin tank these positively charged minerals are attracted to the negatively charged resin beads and they stick to them. This process successfully removes the minerals from your water, making it soft.

3. Soft water is available for use in your home

The water that flows out of your resin tank is free from calcium and magnesium thus providing your home with soft water.

4. Your water softener performs a regeneration cycle

Periodically your water softener will perform a regeneration cycle where a salt solution from your brine tank will rinse the resin beads. The negatively charged sodium ions in salt have a strong enough negative charge so that they can attract and remove the positively charged minerals on the resin beads.

The calcium, magnesium and sodium are then flushed away down your drain. This process will clean your resin beads, making them ready once again to soften your water.

 

Water softeners are whole house water filtration systems that will give you soft water

3. Fridge Water Filters: $1,600 - $2,500+ (for a refrigerator with a water filter) and $30 - $100 (for replacement filters)

Pros:

Fridge water filters are a very convenient and inexpensive way to get filtered water.

Cons:

Once they have removed a certain amount of contaminants, fridge filters are no longer effective. They need to be replaced periodically, usually about once a month.

Even though fridge filters are relatively inexpensive to replace, they cannot remove as many substances from your water as a reverse osmosis system can.

 

How Fridge Filters Work

1. Your fridge is connected to home plumbing.

A fridge that has a built in water filter, is hooked up to your home's plumbing system so that it has a constant supply of water to dispense.

2. Water enters your filter.

Water is forced through activated carbon that is located inside your fridge filter.

3. Carbon attracts certain contaminants.

The carbon in your filter will attract contaminants that are present in your water much like a magnet attracts metal. These contaminants will stick to the carbon which successfully removes them from your drinking water.

4. You can dispense your filtered water.

The resulting filtered water now available through your fridge's water dispenser.

 

WaterSmart stocks a wide range of competitively priced fridge filters

4. Faucet Mounted Filters: $30 - $100

Pros

Faucet mounted filters are relatively easy to use, install, and to clean.

You can remove them and take them with you if you move which makes them a good choice for renters.

Cons

Faucet mounted filters can be awkward if you want to use your sink as they take up space and stick out from your tap quite a bit.

They are also not very attractive to look at and they can ruin the look of an otherwise beautiful tap.

In addition, they can decrease the rate of flow of your water from you tap.

If you have a pull-out, hand-held or spray faucet, you may find it difficult to get one to fit it properly.

 

Source: Amazon

Faucet mounted filters can be awkward and unsightly to look at

 

How Faucet Mounted Filters Work

1. Purchase a filter that will fit your current tap.

2. Connect your filter to your tap according to the manufacturer's instructions.

3. Turn on your tap. The water will pass through the filter and remove the contaminants that it is made to remove.

 
 

Whole House Water Filtration SYSTEMS - WHY CHOOSE WATERSMART?

WaterSmart has been serving the Waterloo region including, Kitchener, Cambridge, Guelph, Brantford, and surrounding areas since 1994 with innovative whole house water filtration systems.

We are committed to helping you improve the quality of your home's water. We live and work in the Kitchener-Waterloo region so we understand the hard water challenges of this area. We know how to program your water softener for maximum efficiency and are familiar with the types of water softener repairs that you might need.

We also offer other effective whole house water filtration systems like reverse osmosis and fridge filters.

Want to learn more? Contact WaterSmart today to talk to one of our water systems experts.

 
 
 
What a great experience!! I did a search on the internet, called regarding the price of a water softener and the next day it was installed and we had soft water again. Paul removed the old softener, installed and setup the new one and was out in just over an hour. He also noted that the grounding of water pipe was not done by previous installer and he corrected that as well. Cost was the same as softener that was installed 14 years ago - I am impressed.
— Lisa Roes
 
Powered By ProfitWorks.ca